Operating Device; Symbols - PRO Intellect Technology 6024S Gebrauchsanweisung

1. Connect power wire to electricity network.
2. Turn power switcher into 'ON' position. The below segment of receiving chute filling indicator
should light.
3. Put paper sheets into receiving chute, (but not more than signed on shredder (image 3.p.1) or in
the table on page 2 or 1) or a CD* into CD chute. It is forbidden to terminate CDs in paper receiving
chute. Shredder automatically switches on after putting paper into receiving chute and switches off
after the sheets are terminated.
4. If the number of sheets exceeds the admitted number or paper was clutched in shredder chute,
the engine will stop automatically, reverse motion will be on and the sheets will be ejected. Take
paper from receiving chute and continue the cutting.
5. In case of clutching of paper sheets push button "REVERSE" and the engine will work in the
opposite direction and paper will be returned back. Take it from receiving chute and continue the
cutting.
6. After finishing your work turn power switcher into 'OFF' position.
MODEL: TERMINATOR 13020C
130 - Waste bin volume
20 - Max quantity of terminated sheets (A4, 80 g/m
C - Shredder classification index
1 - Max quantity of terminated sheets (up to 20 sheets, A4, 80g/m
2 - Termination of CD, DVD, floppy discs, staples
3 - Number of fragments from 1 A4-format sheet (1800 pieces)
4 - Size of cutting piece (1.8х18mm)
2 )
1
2
3
4
Fig.3

Operating device

Symbols

2 )
13