Miele DAR 3000 Gebrauchs- Und Montageanweisung Seite 7

Please take care to read the
operating and installation
instructions for the cooker hood
before installing the drop-down
frame. Only connect it to the
electricity supply when the
installation of all components is
complete.
1) Unit height in extraction mode, if the
air is being conducted upwards out
of the unit.
2) Unit height in recirculation mode with
DUU 151 recirculation kit.
3) Trim the wall unit carcase so that it is
50 mm shorter than the wall unit
door.
All other unit dimensions are as quoted
on the building-in diagrams for DA
3360, 3460, 3480 and 3490. A unit
base is not required.
DA 3490 cannot be installed in a
600 mm wide unit with the drop-down
frame.
,
The safety distance between the
cooker hood and the hob must be
maintained when the cooker hood is
lowered.
Ensure that the area underneath the
cooker hood is free and that when the
cooker hood is lowered, it will not be
hindered by other objects (e.g. tiling,
units to the side).
Please also check that the cooker hood
can move freely up and down inside
the furniture unit.
Do not attach any components to the
cooker hood which could impede its
movement.
,
The connection cable must be
able to move freely with no risk of
entrapment when the cooker hood
moves.
en - English
7