Sharp QT-37H Serviceanleitung Seite 14

OQT-37H/E
PACKING PROCEDURE
Setting positions of every switch and knob.
The beat cancel switch is set at A position. ©
The volume control knob is set at min position.
The balance control knob is set at center position.
The tape selector switch is set at NORMAL and OFF position.
The function selector knob is set at tape position.
The FM Mode selector knob is set at stereo position.
The band selector knob is set at MW position.
The digital tape counter is set at 000 position.
The tuning control knob is set at start point O position.
The mechanical button are set at disengeged position.
PACKING METHOD (QT-37E Only)
Polyethylene Bag,
Unit
SSAKHO171AFZZ
Packing Add. (Top)
SPAKA1058AFZZ
Packing Add.
(Bottom)
SPAKA1056AFZZ Polyethylene Bag,
Speaker
Packing Case
SPAKC2463AFZZ
—24—
SSAKHO172AFZZ
=
Li
pa]
Polyethylene Bag,
Operation Manual
SSAKA0104AFZZ
Plug, Erasing
QPLGZ0152AFZZ
Cassette Tape
RTPEKO101AFZZ
Operation Manual
TINSEO892AFZZ
Caution Label
TCAUHOO56AGZZ
Warranty Card
TGANE1117AFZZ