Blitz Automaster 3 Betriebsanleitung Seite 10

10
Operating Instructions
Faults, causes, remedies
6 Faults, causes, remedies
Fault message E-1
Cause
Fall short of the minimum supply pressure
(7 bar)
Fault message E-2
Cause
Defect of the pressure transformer
Fault message E-4
Cause
Tyre valve is not open
Filling hose is kinked
Fault message E-5
Cause
Environmental pressure compensation is not
possible
Filling hose is kinked
Remedy
Check the supply pressure, and set, if and
when necessary ( min. 7 bar ; max. 16 bar )
Remedy
Notify the Service Department
Remedy
Remove valve plug and connect again
Check the fi lling hose
Remedy
Open the valve plug
Check the fi lling hose
110422 06/06