General Viewing Function; Select Channel; Pause The Frame; Previous Channel Recall - Schwaiger DSR 4007 Handbuch

General Viewing Function

Select Channel

If you want to select a channel, use key on the
front panel, PR+, PR- keys or numeric keys on
the RCU. Then, press OK key on the RCU.
In addition to the above normal function,
provides more convenient channel change
function.
While watching, press OK key on the RCU or
front panel. Channel list will be displayed on the
center of the screen.
Three types of sorted channel lists(All, Favorite,
A~Z) are also shown on the left top of the screen.
You can select the channel list you want.
To select a channel, move the cursor up and
down on this channel list and place cursor on a
desired channel. Then, press OK key to watch
the selected channel.
Using keys on the RCU, you can move the
channel list up and down page by page.

Pause the frame

Press PAUSE key on the RCU to pause the
screen. To bring it back to the normal mode,
press PAUSE key once again.

Previous channel recall

Press PR key on the RCU to move
the previous channel you were watching.
GB-18 Digital Terrestrial Receiver -
General Viewing Function
TV & Radio mode
While watching a TV channel, press TV/RADIO
key on the RCU to move to the radio mode.
Press this key once again, and it will bring you
back to the TV mode.
TV & VCR mode
By pressing TV/AV key on the RCU, you can
change the mode from STB to TV or VCR.
Press once to move to the TV mode and LED
displays TV.
Press twice to move the VCR mode and LED
displays VCR.
Press three times to move back to STB mode
and LED displays the channel no.
- Digital Terrestrial Receiver GB-19