CENTROPIX BUBBLE2 Bedienungsanleitung Seite 29

Light signals
BUBBLE is on the charging station
2
• Upper blue LED flashes or is off: Battery full
• Upper blue LED lights up: Battery charging
• Lower green LED flashes: Data transmission
- Flashes once for Schumann frequencies
- Flashes four times for individual frequencies
BUBBLE when worn
2
• Lower LED flashes according to the set
frequency: BUBBLE2 is active
- White LED flashes: Schumann (7.83 Hz)
- Yellow LED flashes: Schumann (14.1 Hz)
- Red LED flashes: Schumann (20.3 Hz)
- Green LED flashes: Schumann (26.4 Hz)
- Blue LED flashes: Individual frequencies
• Lower LED - no light flashes or lights up:
Battery is asleep or empty
For the inductive charging station
• Upper green LED lights up:
Charging station is active
• Upper green LED does not light up:
Charging station is switched off
Change cover
BUBBLE
Our 2 offers not only versatile frequency
options, but also the possibility to customize the
appearance to your style. The scope of delivery
includes a total of 3 different covers (anthracite,
silver, gold), which you can exchange in no time.
Changing the cover is very simple. Turn the current
cover clockwise to remove it from the
frequency generator. Then simply take the desired
cover and replace it by turning it anti-clockwise.
Please ensure that the rubber ring is properly
seated on the housing before fitting the cover.
Ensure that it ispositioned correctly to guarantee
the effectiveness of the seal (splash protection).
Remove cover
BUBBLE
2
DE
EN
Fasten cover
10