Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Commissioning & Battery Charging
Charging is required before using the
the first time. The battery of the
inductively with the supplied charging station. To
do this, plug the USB-C connector into the char-
ging station and the USB connector into a suitable
USB socket of a power plug or to a device with
a supply current (e.g. computer). As soon as the
charging function is ready, a green LED in the char-
ging station lights up.
BUBBLE
Now place the
station. As soon as the charging function starts, the
top LED on the back of the
blue. If the blue LED flashes or is off, the battery is
fully charged. The full charging time is 3-4 hours.
BUBBLE
Now the
BUBBLE
The
7.83 Hz and an intensity level of 40 µT. With this
B
setting, the
2
can also be used without an app.
07
BUBBLE
BUBBLE
2
is charged
2
on the inductive charging
BUBBLE
2
lights up in
2
is charged and switched on.
2
is supplied with a frequency of
Correct communication channel
2
for
Important: The
to the internet (WiFi) or the CENTROPIX app (Blue-
tooth). Communication with the
exclusively by means of infrared via the supplied
charger! The correct communication path to the
is therefore as follows:
1
SMARTPHONE
Connect your cell
phone to the
Internet using
WiFi or mobile
data.
Activate Bluetooth.
BUBBLE
2
CANNOT connect directly
B
2
takes place
2
CHARGER &
BUBBLE
CENTROPIX APP
2
Connect the
Open the
charger to a power
CENTROPIX app
source.
on your cell phone.
B
2
Place the
on
Connect the
the charger.
with the app.
The data transfer
Select the desired
takes place
frequency program.
automatically
via infrared.
B
2
3
B
2
Werbung
