Austro Flamm Chester compact Benutzerhandbuch Seite 10

Chester
5. Problems
problem
door glass gets sooty too fast
stove does not get enough
combustion air
stove smells strongly and there is
smoke on the outside surface
exhaust gas emission while
putting more wood on the fire and
during operation
8
possible reason
bad chimney draught
incorrect use of the combustion air
supply lever
wood logs are too large
operating temperature was not
reached
chimney draught not sufficient
stove is sooted inside
baking phase of the varnish
stove is dusty/dirty
chimney draught no sufficient, flue
pipe connection leaky
the stove door was opened before
the wood has burnt down to
embers
solution
generally: door glasses must be cleaned with
Austroflamm glass cleaner from time to time (depending
on the frequency of use)
contact your chimney sweep (elongate chimney/draught
metering)
please operate air lever according to user's instructions
(if secondary air is closed, the door glass soots rather
fast)
keep to the max. fuel quantity according to user's
instruction
more fuel, use dry wood (< 15 % residual moisture),
attend air regulation
contact your chimney sweep (elongate chimney/draught
metering)
more fuel, use dry wood (< 15 % residual moisture),
attend air regulation
there may be some odour development during the first
operations
cleaning before the heating season starts!
inspect joints and seal up again if necessary
check chimney draught, examine operating - for info
video follow:
http://www.austroflamm.com/de/Video/index.html
put more fuel wood into the combustion chamber only if
there are only embers left (no more visible flame)
english