Environmental Protection - Ronix Rc-8010 Bedienungsanleitung

2) Remove the drain plug with an 8 mm socket or wrench.
3) When the used oil has drained, reinstall the drain plug and tighten
with the wrench.
4) Unscrew the cap of oil fill hole.
5) To refill, use a funnel to pour oil into the hole. Refill only with synthetic
oil fil SAE 5W40.
NOTE:
Avoid refilling with too much oil. Ensure that the level of the oil does not
exceed the top of the red dot at sight glass. The recommended amount
of oil for refilling is 250ml.
1) Tighten the cap securely into the fill hole.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing of as waste. The machine,
accessories and packaging should be sorted for environmental-friendly
recycling.
35
User Manual