Break In Period - Ronix Rc-8010 Bedienungsanleitung

2) Life the air compressor toward you until it balances on the wheels.
3) Push the unit along to the desired location.
Lower their air compressor unit it sits securely on a flat surface

BREAK IN PERIOD

Before first use, run the air compressor at zero tank pressure with the
drain valves fully open for 30minutes.
TURNING THE AIR COMPRESSOR ON/OFF
1) With the air compressor plugged in, pull the power switch to the ON
position to power the compressor on.
2) To turn the air compressor off, push the power switch to the OFF
position.
NOTE:
When the compressor is in the ON position, the air compressor will
automatically turn back on when the designated tank air pressure limit.
It will also shut off again when the desired limit. It will also shut off again
when the desired pressure is reached.
WARNING!
Never exceed the air tool's pressure rating as recommended by
the manufacturer. When using this air compressor as an inflation
device, always follow the maximum inflation guidelines stated by the
manufacturer of the item being inflated.
29
User Manual