Selecting Modes; Correct Operating Position - Ryobi Rp4000 Bedienungsanleitung

gB
FR DE ES
OPERATIOn
T U R n I n g T H E

SELECTIng MODES

See Figure 3
The ON/OFF/LASER MODE selector button is located on
top of the unit.
To turn the laser on, press the ON/OFF/MODE selector
■
button on top of the unit. The laser will be in crosshair
mode with plumb dots above and below the unit.
Press the button to change from crosshair to horizontal,
■
and again to change to vertical laser beam mode.
To turn the laser off, press the button again.
■
IT nL PT DK SE
L A S E R O n / O F F A n D
FI nO RU PL CZ HU
English

CORRECT OPERATIng POSITIOn

See Figure 3
Set the plumb/cross laser on a stable surface or attach
■
it to a tripod (not included). There is a threaded tripod
mount on the bottom of the unit.
For greatest accuracy, place the plumb/cross laser at a
■
height that allows the laser beam to be projected straight
onto the target surface.
A lock icon in the side window indicates that the unit is
■
locked into place. When any part of the black lock icon
is visible, the unit is in locked position.
nOTE: Using the unit when the plumb/cross laser is
locked into the housing will not result in an accurate
reading.
7
RO LV LT EE HR SI SK gR TR