Cleaning; Storage During Non Use; Troubleshooting - Parkside Performance Pbl 40 A1 Bedienungs- Und Sicherheitshinweise

Important note:
1 . Maximum volume of speaker will be decreased
when your USB-A output is charging portable
device .
2 . This USB-A port can only provide max output
5V/2 .1A .
3 . Please always backup your data of USB
device . Otherwise, your data may lose by any
possibility .
4 . This USB-A port may not supply power to some
of USB devices .
5 . When not using or after charging, remove the
USB cable .
6 . Do not connect power source to this USB-A
output port . Otherwise, there is risk of fire . This
USB port is intended for charging low voltage
device .
7 . Do not insert any small metal object or
wire, etc . into this USB power output port .
Otherwise, a short circuit may cause smoke
and fire .
8 . Do not connect this USB-A socket with your PC
USB port, as it is highly possible that it may
cause breakdown of this unit .
˜ Cleaning
Switch the product off and remove all cables /
o
rechargeable battery before cleaning .
Only clean the outside of the product using a
o
clean, dry cloth for cleaning the product and
never use any corrosive liquids / abrasive
cleaning agents . Use a slightly moistened cloth
and a mild cleaning agent to remove stubborn
dirt .
˜ Storage during non use
Store the product in a dry environment when
o
not in use . Protect it from dust and direct
sunlight .
Battery pack advice*
Store the battery pack separately .
o
The rechargeable battery need to be charged
o
regularly, for example every 3 months when
storing for extended periods . Recharge as
necessary .
* Battery pack and battery charger are
not included.
˜ Troubleshooting
= Fault
= Possible cause
= Action
= No functions
= Battery drained .
= Recharge the battery
= No Bluetooth
®
= Error operating the product .
= If necessary, unplug the AUX cable
[ 9 ]
the AUX-in jack
= Switch the product off and on again and
increase the volume .
= Playback device error .
= Check to see if the product was detected by
the playback device .
= Check to see if the playback device has
detected and connected to any other devices
with Bluetooth Standard 5 .3 .
®
= No music playback via Bluetooth
= Error operating the product .
= Check to see if the AUX cable
inserted into the AUX-in jack
it .
= If the product is switched on, turn it off and on
again .
= Press and hold the
connection to the playback device .
= Increase the volume on the playback device .
= No music playback via AUX-in
connection
= Error connecting the AUX cable
= Reconnect the AUX cable
device .
= The volume at the playback device or at the
product is too low and has to be increased .
connection
[ 14 ]
from
.
®
[ 14 ]
is still
9 ] [
, if it is remove
5 ] [
button to start a new
14 ] [
.
[ 14 ]
to the playback
GB/IE 33