Power Up Speaker Via Ac Power Adapter (Fig . A); Power Up Speaker Via 12/20V Rechargeable Battery (See Fig B To Fig . D); Using The Product - Parkside Performance Pbl 40 A1 Bedienungs- Und Sicherheitshinweise

˜ Power up speaker via AC
power adapter (fig. A)
First, insert the DC jack of power adapter
into 18V DC input socket
speaker .
And then plug the power adapter
nearby mains socket outlet . Whenever the
power adaptor is used and the 12/20V
rechargeable battery is automatically
disconnected to speaker .
Second, press and hold approx . 2 seconds
Power ON/OFF button
speaker then start using this product .
m
CAUTION:
Always disconnected the AC power
adapter completely before moving
speaker. If AC power adapter is not
removed, it may cause an electric
shock.
Never pull and/ Or drag the power
cord of adaptor. Otherwise, the
speaker may fall and causing injury
to you or someone around you.
The mains power adapter is used as the means
of connecting the speaker to mains supply . The
mains socket used for the speaker must remain
accessible during normal use .
In order to disconnect the speaker, the mains
adaptor should be removed from the mains
outlet completely .
Use the AC power adaptor supplied with the
product only .
˜ Power up speaker via 12/20V
rechargeable battery (see fig B
to fig. D)
m
Important note:
u
Either one of 12V or 20V
rechargeable battery can be
installed and use onto Bluetooth
speaker.
u
Rechargeable battery is not
included in this product.
30 GB/IE
[ 15 ]
10 ] [
of Bluetooth
15 ] [
into
1 ] [
of Bluetooth
You can insert 12V/ slide 20V rechargeable
battery into respective battery socket
please follow below steps to install rechargeable
battery .
1 . Identify which kind of 12V/ 20V battery that
you will be installed on Bluetooth speaker .
2 . 12V battery need to insert to battery socket
of speaker .
3 . 20V battery need to be slide into battery
[ 11 ]
socket of speaker .
4 . Please always insert/ slide battery all the way
until it locks in place with a little click to make
sure battery firmly placed inside battery socket .
5 . If the rechargeable battery cannot insert/ slide
into battery socket easily . Please do not force
to install it . And this may be due to battery not
being insert correctly .
6 . To remove battery from socket, press and
unlock battery latches and slowly put it out
from socket .
˜ Using the product
Press and hold the
o
seconds until the LED
signal tone sequence sounds . The product will
now attempt to connect to the playback device
(e .g . smartphone or computer) .
[ 11 ] 12 ] [
or ,
12 ] [
1 ] [
button approx . 2
2 ] [
light up white and a