Cleaning the circular blade
Thoroughly clean the circular blade after each
use by hand.
Pic 10
Fold up the table and take out of the
hinge to the right.
Pic 8
Rotate the blade holder in a clockwise
direction and place vertically. Then take out
the circular blade.
Risk of injury from falling blade!
When re-attaching the blade, ensure that it
is locked correctly in position = blade holder in
horizontal position.
Complete cleaning
Pic 11
Remove the stop plate. To do this, turn
the knob beyond the 0 position to ► and
remove the stop plate.
To insert the stop plate, the knob must
be on ►! To insert, press the stop plate
directly in the middle and turn the knob back
to 0.
Check by adjusting the cutting width. If
the appliance does not function, remove
the stop plate again and repeat the process.
Storage
Risk of injury from sharp blade!
Keep the appliance out of the reach of
children.
Pic 3
Move the rotary knob to 0.
Pic 9
After using and immediately cleaning,close the
appliance.
Pic 12
Wind up the cable and lock the plug into
position.
This appliance is marked according to the
European directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE).
This guideline is the frame of a European-wide
validity of return and recycling on Waste Electrical
and Electronic Equipment.
Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
this, you help to preserve the environment.
Guarantee & service
If you need information or if you have a problem,
please contact the Gorenje Customer Care Centre
in your country (you find its phone number in the
worldwide guarantee leaflet). If there is no Customer
Care Centre in your country, go to your local
Gorenje dealer or contact the Service department of
Gorenje domestic appliances.
For personal use only!
We reserve the right to any modifications!
WISHES YOU A LOT OF PLEASURE WHEN
USING YOUR APPLIANCE
17
GORENJE