Electrical Connections - Ronix Rh-4020 Bedienungsanleitung

ELECTRICAL CONNECTIONS:

The installer is responsible for making the electrical connections to the
mains supply in compliance with the relevant gulations in force;
- Make sure that the specifications on the pump rating plate and the
rated line values are the same;
- Connect the pump to an effective earth circuit and then connect up the phases
following the diagram on the terminal block cover or rating plate;
-Our single-phase motors ate protected against overloads using a thermal
device (overload cutout) fitted in the winding.
IMPORTANT:
Fill the pump completely with clean water before switching it on. The
water should be poured in through the priming.
19
User Manual