Use And Maintenance Instructions; Operating Conditions - Ronix Rh-4020 Bedienungsanleitung

USE AND MAINTENANCE INSTRUCTIONS

Carefully follow the instructions below to obtain the best performance
and a long service life from your pump.
Contact RONIX service center if you have any problem.

OPERATING CONDITIONS:

these pumps have been designed to pump neutral clean liquids in which
no abrasive solids are suspended at temperatures of no more than 60ºC
INSTALLATION:
The pumps must be installed in a dry well-ventilated place with an ambient
temperature of no more than 40ºC.
Fix the pump in place on a solid flat surface using suitable bolts to avoid
vibration. The pump must be installed in a horizontal position to ensure,
that the bearings operate correctly. The diameter of the intake pipe must
not be smaller than that of the intake mouth. If the intake height exceeds
4 meters use a pipe with a larger diameter. The diameter of the delivery
pipe must be chosen to suit the flow rate and pressure required at the
take-off points.
17
User Manual