Ronix RH-4020 Bedienungsanleitung Seite 16

POWER TOOL USE AND CARE
- Don't force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for
which it was designed.
- Don't use the power tool if the switch doesn't turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and
must be repaired.
- Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing accessories,
or storing power tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
- Store idle power tools out of the reach of children and don't allow persons
unfamiliar with power tool or these instructions to operate the power
tool. Power tools are dangerous in the hand s of untrained users.
- Maintain power tools. Check for misalignment or binding of moving
parts, breakage o parts and any other condition that may affect the power
tool's operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
- Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
- Use the power tool, accessories and tool bits etc. in accordance with
the instruction, taking into account the working conditions and the work
to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
SERVICE
- Have your power tool serviced by Ronix Service Center. This will ensure
that the safety of power tool is maintained.
- Follow instruction for lubricating and changing accessories.
- Keep handles dry, clean and free from oil and grease.
16
Peripheral Pump 0.5hp