Malfunction
Possible reason
The coffee maker dis-
The coffee grounds container
play shows the message
sensor is blocked
that the used coffee
grounds container is not
installed, though it is
installed to its place
The display shows the
The water tank is empty
icon «Water tank»
The brewed coffee is
The grind is too fine
too weak
Dark roasted coffee is used for
preparing drinks, which releases
more coffee oil, the grinder
knives become sticky, the beans
do not enter the coffee machine
Wet coffee has blocked the
coffee maker operation
Coffee is not poured into
The water tank is installed
the cup
improperly
The filter on the piston of the
brewing unit (12) is clogged
Water supply pipes for making
coffee are blocked
STORAGE
– Before taking the unit away for storage, unplug it and
let the unit cool down completely.
– Clean the unit.
– Do not leave, use and keep the unit in places with the
temperature below 0°C.
– Keep the unit in a dry cool place out of reach of chil-
dren and handicapped persons.
TRANSPORTATION
– Keep the original packaging of the coffee machine
for safe transportation.
– Remove all water from the water tank (4) of the coffee
machine and its internal parts, wipe dry with a soft cloth.
Solution
Remove the used coffee grounds container and
thoroughly clean all corners of the container area
with the soft brush supplied with the unit, and clean
all outer corners of the container with a dry cloth.
Fill the water tank with clean water and install it into
the socket behind the left door of the coffee maker
and press until clicking
Adjust the grinding by setting it to less fine grind
During the coffee maker operation turn the control
knob to the direction of «+». If the problem remains,
contact the service center.
Remove wet coffee beans, clean the coffee bean
container and add dry coffee beans
Fill the water tank and place it in the socket behind
the coffee machine left door, press on it until
bumping
Clean the brewing unit following the guide, thor-
oughly clean the filter on the brewing unit piston or
apply to the service center.
Perform the decalcination following this guide. If the
problem remains, contact the service center.
DELIVERY SET
Coffee Machine – 1 pc.
Milk supply tube – 2 pc.
Stainless steel platform for heating cups – 1 pc.
Measuring spoon for coffee – 1 pc.
Metal brush for cleaning the milk supply system – 1 pc.
Soft brush for cleaning the brewing unit – 1 pc.
A set of spare silicone rings for the brewing unit – 1 pc.
Plug for milk system inlet – 2 pc.
Instructions with warranty card – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50-60 Hz
Rated input power: 1300-1500 W
Water tank capacity: 1,6 L
33