Safety Warnings; Preliminary Information; Identification; Product Identification - Femi Job Line DP 12-941 PLUS Bedienungsanleitung

1. Safety warnings

Refer to "General safety regulations".

2. Preliminary information

Refer to "General safety regulations".

3. Identification

3.1. Product identification

NAME
Drill press DP 12-941 PLUS - DP 12-951 PLUS

3.2. CE Declaration of conformity

EN- DECLARATION OF CONFORMITY
in compliance with European Directive 2006/42/EC
Annex II.A
FEMI SpA
Via del Lavoro, 4
40023 Castel Guelfo - (BO) ITALY
declares that the machine:
DRILL PRESS
MOD.: DP 12-941 PLUS / DP 12-951 PLUS
manufactured in (see label reported on page 163):
▪ complies with the provisions of Directive 2006/42/
EC and the implementing provisions;
▪ furthermore, it complies with the following provisions
and related implementations: 2014/30/EU, 2014/35/
EU, 2011/65/EU, 2012/19/EU.
Harmonised standards:
▪ EN 61029-1:2009+A11:2010,
▪ EN 12717:2011+A1:2009,
▪ EN 55014-1:2006+A1+A2
▪ EN 55014-2:2015
▪ EN 61000-3-2:2014
▪ EN 61000-3-3:2013
The person authorised to prepare the technical file:
MAURIZIO CASANOVA
c/o FEMI S.p.A. Via del Lavoro, 4
40023 Castel Guelfo - (BO) ITALY.
INSTRUCTION MANUAL - TRANSLATION OF THE ORIGINAL INSTRUCTIONS

3.3. After-sales service

Refer to "General safety regulations".

4. Safety

4.1. Safety devices

POS. DEVICE
A
MODEL
B
C
DESCRIPTION
MOVABLE INTER-
If it is opened, the machine
LOCKED
stops.
GUARD
It protects the operator against
PLEXIGLASS contact with the rotating tool
CHUCK GUARD or with parts ejected during
processing.
If pressed, it disconnects the
OFF BUTTON
power supply.
B
C
WARNING! It is forbidden to remove
and/or tamper with the machine's
safety devices.
A
English ▪ 15