Werbung
Verfügbare Sprachen
Verfügbare Sprachen
temperatures may also cause the unit not to perform properly. This unit is not designed for use in
a garage or outdoor installation. Do not drape the unit with any covering.
When installing the unit, ensure that 10 cm of free space is left at both sides, 10 cm at the rear
and 30 cm at the top of the unit. This will allow cold air to circulate around the wine cooler and
improve the efficiency of the cooling process.
2.2 Door Handle Install Illumination(optional)
1) Take out the screw caps from the door handle holes.
2) Put the handles into the screw holes and then hit them to fix .
3) Cap the screw caps on the handle screws.
EN-3
Werbung
