HT Instruments CEM DT-8806H Bedienungsanleitung Seite 32

11-6. Measurement modes
The instrument is especially designed to take the body temperature of
a human being. For this, use the Body mode. Measurement range for
Body mode: 32°C to 42.5°C (86°F to 108°F). You can also use the Non-
contact Body lnfrared Thermometer to measure the temperature of an
area or an object, a food, a liquid or a room
the Surface mode. Measurement range for Surface mode: 0°C to
60°(32°F to 140°F).
IMPORTANT NOTE: The area temperature differs from the internal
body temperature.
Body mode. Please make sure to select the Body mode for an internal
temperature reading and the Surface mode for an external area
reading (bottle, bath, room...)
11-7.Internal memory
Data memory automatically after temperature measurements, which
will display at the right corner of
display the last temperature measurement.
Deleting internal memory
1. With instrument switched off press UP and DOWN keys together
tor 2s to display the last temperature measurement
2. Change the order number to "0" and press MODE key in order to
delete all memory data
11-8. Battery replacement
When the " " symbol is displayed is necessary replace batteries.
1. Open the battery cover
2. Remove the batteries and replace with new ones of the same type (see
§ 8). Taking great care to respect the correct
rechargeable batteries. Use only batteries for single
Restore battery cover
3. Remove the battery from the instrument if it is not required tor
extended periods of time in order to avoid damage to the
thermometer resulting from a leaking battery
4. Do not dispose of used batteries in the environment. Use the
appropriate containers for disposal
Non-contact forehaed infrared thermometer
To obtain the internal temperature always use the
LCD.
EN - 13
temperature.
Press UP key or DOWN key to
polarity.
For this, use
Never use
usage.