20
Risk of scalding
!
–
Wait until the orange light lights up
before opening the brewing unit.
–
Never open the brewing unit during
the brewing process.
–
Please note that the beverages are
very hot when dispensed.
TAS40 EU 091009.indd 20
2b
20 sec.
b. For a
Start the brewing process by pressing
the start /stop button.
O
automatic brewing process is complete,
N
Manual icon lights up. If you press
and hold the start /stop button within 20
process to get your desired drink
strength.
20 seconds after the end of each brewing
process, your TASSIMO machine returns
to stand-by mode.
Open the brewing unit and remove the
T DISC. Now you can sit back and enjoy
your hot drink. If you wish, you can
If you do not wish to prepare more
drinks, we recommend that you turn off
your TASSIMO machine using the on/off
switch.
!
Note:
There may be short pauses during the
brewing process. This is so the drink
Do not remove the water tank during the
brewing process.
Always remove the used T DISC after
the brewing process. Be careful and hold
after brewing your drink. When removing
the printed side is face up to avoid any
dripping.
T DISC storage
T DISCS may be stored in their own
packaging or in other containers of your
choice. They should be stored in a cool, dry
place. It is not necessary to store T DISCS
in the refrigerator. Do not keep them in the
freezer. Provided the outer packaging is
intact, T DISCs may be used until the Best
Before date provided.
en
and a larger drink:
09.10.2009 16:55:10