Steps For Iot Network Operation - Andersen Electric VEGA FLOW SILENT PRO Bedienungsanleitung

Instruction Manual
IOT NETWORK MANAGEMENT LEVEL
1. Before activating Lot network operation,
connect your mobile phone to your router's
WIFI and enable Bluetooth on your mobile
phone, ensuring that the device and mobile
phone are within WIFI range (make sure
the router's WIFI is enabled for 2.4 GHz
network).
2. When the device is turned on, in the OFF
state, press and hold the power button on
any device for 5 seconds. The device's status
indicator will blink slowly red, after which
the device will enter WIFI mode, and your
device will be available.
for the user and the installer
3. Open the downloaded Smart Vent app, go
to the control page, click on add device, and
search for devices.
4. Then click add for network connection.
98