Audible Signals - Reiner speed-i-Marker 940 Bedienungsanleitung

speed-i-Marker 940 speed-i-Marker 940

4.4 Audible signals

Signal Cause
Continuous - Print speed is not ok
tone
1 Bleeb - Print start
- Print end
- When in stepping
function and if, while
the dial is in function
(F) position, the print
trigger is activated.
1 Bleeb every - None or a defective ink
10 seconds cartridge
- Wrong cartridge
- Ink-level mis-indication
- Ink cartridge is not
inserted correctly
- Rechargeable battery
empty
- No rechargeable battery/
faulty battery
2 Bleebs every - Ink cartridge almost
30 seconds empty
3 Bleebs every - Ink cartridge empty
10 seconds
4 Bleebs every - Lock is open
10 seconds
5 Bleebs per - Rechargeable battery
minute almost empty/ weak
capacity
Rectification Notes
- Check imprint - Continuous movement
- Insert ink cartridge The detailed cause and
rectification can be deter-
mined by the PCset GRAPHIC
software with connected
- Insert ink cartridge speed-i-Marker 940.
correctly
- Charge the
rechargeable battery
- Insert / replace
rechargeable battery
- Check imprint
- Replace ink
cartridge
- Close lock - Risk of ink drying
- The signal becomes of higher
- The signal ends when the lock
- Charge / change
rechargeable battery
necessary
frequency and more penetrat-
ing, the longer the lock
remains open
is closed again or a new
imprint is carried out .
47