Microsoft Surface Hub Auspackanleitung Gebrauchsanleitung Seite 6

7. Using a 6mm hex wrench, remove the four lag bolts that secure the shipping brackets on the Surface Hub to the wood crosspieces.
WARNING: Trip hazards
To reduce the risk of back injuries, it is required that a minimum of four people lift the device. Two assistants should lift from the end handles to help guide the
device to the proper location, ensuring that the device is kept vertical and is not allowed to tip backwards. Two additional assistants will help to support the
weight of the device.
WARNING: Handling
To reduce risk of injury or damage to the device, two people should remain at the ends, holding the device upright once it is standing on the floor.
Lifting the 84" Surface Hub
WARNING: Weight hazard
This device is very heavy. To reduce the risk of back injuries, it is required that a minimum of four people lift the device. Two assistants should lift from the
end handles to help guide the device to the proper location, ensuring that the device is kept vertical and is not allowed to tip backwards. Two additional
assistants will help to support the weight of the device.
6
K