Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Digital Hot Air Frying Machine
Never immerse the main unit and the connecting cable in water
■
or other liquids, and ensure that these components cannot fall
into water or become wet. There is a danger of electric shock!
Do not pour any liquids (e.g. oil or water) directly into the
■
device or the drawer or place a liquid-fi lled vessel into the
device. It works exclusively with hot air.
The device must always be disconnected from the mains pow-
■
er when it is left unattended and before transporting or clean-
ing the device.
Do not make any modifi cations to the device. Also do not
■
replace the connecting cable yourself. If the device, the con-
necting cable or the accessories of the device are damaged,
they must be repaired or replaced by the manufacturer, cus-
tomer service department or a specialist workshop in order to
avoid any hazards.
The device is not designed to be operated with an external
■
timer or a separate remote control system.
Follow the instructions in the "Cleaning and Storage" chapter!
■
DANGER – Danger of Electric
Shock
Use and store the device only in
■
closed rooms.
Do not operate and store the device
■
in rooms with high humidity.
If the device falls into water while it is
■
connected to the mains power, pull
the mains plug out of the plug socket
immediately. Only after this should
you retrieve the device from the
water. Never attempt to pull it out of
the water while it is connected to the
mains power! Before using it again,
have it checked by the manufactur-
er, customer service department or
an authorised distributor in order to
avoid possible hazards.
Never touch the main unit and the
■
connecting cable with wet hands
when the device is connected to the
mains power.
WARNING – Danger of Fire
Do not operate the device in the
■
vicinity of combustible material. Do
not place any combustible materials
(e.g. cardboard, paper, plastic) on or
in the device.
■
Do not connect the device along with
other consumers (with a high wattage)
to a multiple socket in order to pre-
vent overloading and a possible short
circuit (fi re).
Do not use any extension cables.
■
Do not cover the device during
■
operation and keep the ventilation
openings clear in order to prevent it
from catching fi re.
■
In the event of a fi re: Do not extin-
guish with water! Smother the fl ames
with a fi reproof blanket or a suitable
fi re extinguisher.
EN
15
Werbung
