Safety Instructions; Installation Instructions; Maintenance Instructions - Lumisky Roly Betriebsanleitung

Content :
- ROLY string light
- Instructions for use
Before using this appliance for the first time, please read these
instructions carefully and keep them in a safe place for future
reference.

1. SAFETY INSTRUCTIONS

Do not use the product if the cable is faulty or damaged.
- Do not place near sources of heat over 60°C.
- Keep out of the reach of children.
- Handle the product with care. Never open the appliance, as this will
invalidate the warranty
- Use the product only as indicated in the manual.
- Do not exceed the authorised voltage
- Do not change the batteries, as they are non-replaceable.
- If you leave the luminaire unused or unattended for a prolonged
period of time, switch it off.
- The light source of this luminaire is not replaceable. It can only be
repaired by authorised personnel. Contact the after-sales service.

2. INSTALLATION INSTRUCTIONS

Please ensure that the device is placed in a stable position when in
use and that the light strip does not form an obstacle that could cause
tripping.When the garland is installed in a tree, please ensure that it is
installed on solid, well-maintained branches.Do not staple or nail the
cable. Do not hang ornaments or other objects on the garland. Do not
cover the garland.Do not exceed the authorised voltage.
Fully charge your device before using it for the first time..

3. MAINTENANCE INSTRUCTIONS

Before each use, the product should be carefully inspected to ensure
that the power cable is not damaged and the bulbs are not cracked.
Clean the external parts of the garland regularly with a damp cloth.
Check periodically throughout the year, especially after the winter
period. Never clean with detergent and/or abrasive cloth.
4. MAINTENANCE INSTRUCTIONS
Before each charge, check that the charger cable shows no signs of
damage or ageing: risk of fire or electric shock.
Connect the supplied USB cable to the USB-C port on your device, then
to the USB port of a switched-on computer or a USB mains charger, not
supplied (maximum 2A).
Charging time: 2.5 hours.
Mode 1 :
Light strip
Constant light
Mode 2 :
Light strip
Firefly light
Mode 3 :
Light strip
Breath light
Mode 4 :
Light strip
Camp lamp
Constant light
Mode 5 :
Camp lamp
Constant light
Mode 6 :
OFF
5. TROUBLESHOOTING AND TECHNICAL SPECIFICATIONS
Never open the unit or you will lose your warranty.
IP44
Autonomy 8 hours
Battery Lithium 2000 mAh
Usb-C charge
3000K-4000 Kelvins
200 lumens
This product contains light sources of energy class X
3