Ec-Declaration Of Incorporation - Nicotra Gebhardt Rlm E6 Betriebsanleitung

BA-CFD-RLM-ATEX 4.2 – 01/2023

EC-Declaration of Incorporation

The manufacturer:
Product designation:
Type nomination:
Serial n°:
Year of manufacture:
The following harmonised
standards have been applied:
1)
Applied, national standards and
technical specifications
2)
particularly:
Nicotra Gebhardt GmbH,
Gebhardtstraße 19-25, 74638 Waldenburg, Germany
herewith declares, that the following product:
Plug fans without scroll of categories 2G for conveying explosive
atmosphere
RLM 55-....-2G; RLM 56-....-2G;
.... . ..-.
RLM E6- - Y- ; RLM E3-
see type plate
see type plate
qualifies as a partly completed machine, according to Article 2, clause "g" and
complies with the following basic requirements of the Machine Directive
(2006/42/EC): Annex I, Article 1.1.2; 1.3.7.
The partly completed machine may be put into operation only if it has been
stated that the machine into which the uncompleted machine has to be
incorporated complies with the requirements of the Machine Directive
(2006/42/EC).
DIN EN ISO 12100:2011 Safety of machines – General design principles
DIN EN ISO 13857:2020 Safety of machines – Safety distances to hazardous
areas
VDMA 24167:1994 Fans - Safety requirements
The manufacturer is committed to providing the special documents, to Annex VII, Part B for
partly completed machines to any state authority on request by mail / e-mail.
Waldenburg, 10.01.2023
Representative for the documentation: Michael Hampel
i.V. U. Reichert
Head of production
1) The complete listing of applied standards and technical specifications see manufacturer's documentation.
2) If no corresponding harmonized standards are available yet
.... . ..-. ....
- Y- ; RLM G6-
i.V. Dr. J. Anschütz
Research and Development Director
English
. ..-.
- Y-
EN-23/24