Specific Hazards - Nicotra Gebhardt Rlm E6 Betriebsanleitung

BA-CFD-RLM-ATEX 4.2 – 01/2023
CAUTION!
CAUTION!
EN-8/24
operation!
The suitability of protection devices and their fixtures to the fan have to
be evaluated within the overall security concept of the installation.
4.4. Professional Staff
1. Ensure that the Installation of the fan and any work on it is carried out by
skilled professionals only with due regard to these operating instructions
and any applicable regulations.
2. Electrical connection to be carried out by qualified electricians only.
4.5. Protective Gear
Ensure that members of staff are wearing protective gear appropriate
to their deployment and environment.
The protective clothing is specified below!

4.6. Specific Hazards

4.6.1. Noise Emission
The sound emission expected during normal use of the fan is documented in
the technical lists and should be duly taken into account.
Wear ear defenders when working near to or on the running fan!
4.6.2. Heavy Loads
The heavy weight of the fan and its components entail the following risks in
transit and during installation (deinstallation):
Risk of being trapped, crushed or cut by moving or toppling machinery
Danger of falling components
Do not stand or work under suspended loads.
Wear a hard hat, safety shoes and gloves.
4.6.3. Rotating Shafts and Impellers
Objects falling onto rotating shafts and impellers can fly off at an angle and
cause serious injury.
Articles of clothing and hair can get caught in rotating shafts and impellers.
Do not remove guards during operation.
Do not wear loose-fitting clothing when working near rotating
shafts and impellers.
Wear goggles.
4.6.4. Hot Surfaces
There is a risk of sustaining burns or scalds on hot surfaces during
operation.
English