Maytronics Classic 4 UNI Gebrauchsanweisung Seite 6

5. USING THE POOL
The PoolCleaner is very easyto use.Just follow the simplestepsto get started, and your Pool Cleaner
is ready to go.
5.1. Setup
Before usingthe Pool Cleanerfor the first time perform the following steps:
Unwind the cable and stretch
completely so that it has no kinks.
Position the power supply so that it
is approximately in the middle of the
long side of the pool at a distanceof
3m/ 1Oft.
2
Attach the floating cable to the power supply
by inserting it with the notch on the connector(1)
lined up with the groove in the socket on the
power supply and turning clockwise(2).
4
CLEANER
it out
3m/ 1Oft
Some models arrive with plastic coverings on the brushes.
Remove
Robotic Pool Cleaner Classic 4 / Top 4 - UNI
0
them before use.
Plug in the power supply and leave it in the
OFF position.
User Instructions