6.4. Cleaning the impeller
If you notice debris trapped in the impeller open the impeller and removethe debris.
7.
OFFSEASON
STORAGE
If the Pool Cleaner will not be in usefor an extended period, perform the following storage steps:
• Disconnect
the Pool Cleaner
• Make sure that no water
• Thoroughly clean the filter bag or cartridges and insert in place
• Roll up the cable so that it has no kinks and place on the Caddy
• Store the Pool Cleaner upright on the Caddy or simply upside down in a protected area
out of direct sun/ rain/ snow at a temperature of between 50-450C/410-1130F
10
Replace the screws.
from
mains
is left in the Pool Cleaner
Robotic Pool Cleaner Classic 4 / Top 4 - UNI
Unplug the power supply.
Usinga screwdriver,remove
the two screws on the impeller
cover and remove
it.
Clear any debris that may
be in the impeller.
User Instructions