Mute Button - Xblitz Rf 200 Bedienungsanleitung

turning the knob. This way you can set the volume to your needs.
B. BASS SETTINGS
1. Keep pressing the knob until the screen says SEE FIG. D. 2. Turn the knob
left or right to set the value.
C. TREBLE SETTINGS
1. Keep pressing the knob until the screen says SEE FIG. D. 3. Turn the knob
left or right to set the value.
D. BALANCE CONTROL FOR LEFT AND RIGHT SPEAKERS
1. Keep pressing the knob until the screen says SEE FIG. D. 4. Turn the knob
left or right to set the value.
E. FADER BALANCE CONTROL FOR FRONT AND REAR SPEAKERS
1. Keep pressing the knob until the screen says SEE FIG. D. 5. Turn the knob
left or right to set the value.
F. MANUAL AND AUTOMATIC TUNING, FAST FORWARD AND REWIND
1. When listening to the radio, press the >>| or |<< button , to change
the received radio frequency to a higher/lower one. Holding the buttons
mentioned above will make the device automatically set the frequency to
a strong signal broadcasted by a radio station.
2. When playing music from a USB drive or an SD card, pressing >>| or |<<
will switch the track played to the next or previous one.
3. BAND button Hold the BAND button for 1 second to make the device
scan the radio band. If it scans the FM band, it will automatically scan
through the FM4 band after it finishes scanning the FM1 band. After the
scan is finished, the radio will save any found radio stations.
G. BAND SWITCHING
1. Press the BAND to choose the band, the bands will be displayed in order
(->FM1->FM2->FM3->FM4->).
H. EQ CONTROL BUTTON
1. Digital sound contro (EQ off/ CLASSIC/ POP/ ROCK). Keep pressing the
knob until the screen says SEE FIG. D. 6. Turn the knob left or right to
change the settings.
I. MONO/ STEREO SWITCH BUTTON
1. Keep pressing the knob until the screen says SEE FIG. D. 7. to choose
between monophonic and stereo settings for the best quality of sound.
Turn the knob left or right to change the settings.
J. MUTE BUTTON
1. Press the MUTE button to mute the sound. Pressing the button again will
unmute the sound.
Staying inactive for 5 seconds in any mode will make the device return to
the previous menu.
16
06. MP3 MODE
1. (1/>|) button
Press to pause the tracks playing from the USB drive or memory card. A ||
sign on the screen means that the music is paused. Pressing the button again
will resume playing the track
2. 2/INT button
Shortly press the button to start browsing the files and playing first 10
seconds of each of them, in the order listed.
3. 3/RPT button
Pressing the button switches between looping one track and looping the
entire playlist.
4. 4/RDM button
Pressing the button will play a random track.
5. 5/-10 i 6/+10 buttons
Pressing the buttons will play the first/last 10 tracks from the playlist.
6. Mode switching button (MODE)
Pressing the button will switch between radio, AUX i MP3 modes.
A. MMC/ SD SLOT, USB PORT AND THEIR USAGE
To play MP3 files, place a USB drive/SD card with tracks on it into the
USB port/SD slot. The device should start playing the files automatically.
Appropriate information will be displayed on the screen as well. If the SD
card and USB drive are connected to the device at the same time, the radio
will play music from the last drive connected.
B. USB/ SD switch button
Press the BAND/ APS button (when both an SD card and a USB drive are
connected to the device) to switch between SD card and USB drive.
07. REMOTE CONTROL
SEE FIG. E
1. Turn on/off
2. End call or choose RADIO/ USB/ SD/ BT/ AUX
3. Mute
4. Receive call/ callback
5. Volume +
6. Automatic radio station choice
7. Previous
8. Sound settings
9. Next
10. EQ settings
17