11. Volume -
12. Clock display
13. Play/ pause or choose 1 saved radio station
14. Intro
15. Loop current or all tracks
16. Play random track
17. Go 10 tracks back
18. Go10 tracks forward
08. REMOTE CONTROL FEATURES
1. Press the POWER button to turn the paired device on/off.
2. When the paired device is turned on: wciśnij przycisk +/-, aby dopasować
głośność,
a. Press the +/- buttons to change volume,
b. press |<< or >>| to choose the previous/next track,
c. press the MUTE button to mute the paired device. Pressing the button
again will unmute the device,
d. press the EQ button to use the digital sound equalizer.
09. FAQ
1. No power
- the car's engine is turned off,
- if the power supply for accessories is installed in the car, you can turn the car
key to ACC to provide power to the accessories,
- if the power circuit is burnt, change it,
- if the temperature in the car is too high, lower it and try again.
2. No sound
- if the sound it set to minimum, set it to a proper value,
- improper wiring, improper file format or damaged files on the drive can cause
the lack of sound.
3. No radio reception
- if the antenna is not connected properly or the reception is weak, make sure
that the antenna is properly mounted in place,
- if you cannot find any radio stations during an automatic scan, the broadca-
sting signal can be too weak for the device to pick it up. Try tuning it manually.
4. Wiring diagram
- make sure that the casing is properly grounded. Proper grounding eliminates
most issues with electronic noise. Good grounding of the casing require connec-
ting it to the car's chassis. The area around the connection should be thoroughly
cleaned - with no rust, paint, plastic or dust - for best grounding quality.
18
10. SPECIFICATION
Power: 4x50W, 12V
Mp3 crosstalk: >55 dB
MP3 SNR: >60 dB
FM crosstalk: >35 dB
FM SNR: >50 dB
FM sensitivity: 30dB S/N <9dB
Voltage: 12V car battery(grounded cathode)
Electric current: Max. 15A (12V)/5A (24V)
Maximum power: 4x50W 908/ 4x35W 9016
Amount of channels:: quadrophonic
FM information:
Frequency range: 87.5 MHz-108 MHz
Sensitivity 3uV
IF (intermediate frequency) 10.7 MHz
RCA line output (optional)
1200Mv output (MAX)
Support of MMC/ SD and USB 50 dB (1KHz)
BT information:
BT version: 5.0
BT frequency range: 2402-2480 MHz
Maximum output power in frequency range: +2 dBm
A 1A circuit breaker is installed in the red wire connector (power supply); 12V/ 15A
and 24V/ 15A circuit breakers are installed in the yellow wire connector (battery).
It is important to make sure the values of new circuit breakers are correct when
replacing the old ones.
11. WARRANTY CARD/ COMPLAINTS
The product is covered by a 24-month warranty. The terms of the guarantee can be
found at: https://xblitz.pl/warranty/
Complaints should be reported using the complaint form located at:
http://reklamacje.kgktrade.pl/
Details, contact and website address can be found at: www.xblitz.pl
KGK Trade declares that this device Xblitz RF200 is compliant with significant
requirements of directive 2014/53/EU. The text of this declaration may be found on
the website: http://xblitz.pl/download/DOC/deklaracja-CE-Xblitz-RF200.pdf
19