Samsung WW10H9 Serie Betriebsanleitung Seite 19

STEP 3 - Set Auto Dispense
The Auto Dispense unit dispenses an appropriate amount of detergent and fabric softener into the
drum according to the course and cycle.
1. Both Auto Detergent and Auto Softener are set
to On by default. To change the setting, slide the
corresponding bar to Off.
2. Set the Amount and the Water Hardness.
3. Set the Amount and the Concentration.
4. Tap Next.
STEP 4 - Set Auto Update
Auto Update updates the firmware automatically for improved performance and/or to fix known
bugs through communication with the update server. Once the firmware is updated, some
functions of the washing machine may not be available depending on the firmware version.
1. To update the firmware automatically, set Auto
Update to On.
2. Tap Done.
STEP 5 - Run Calibration (recommended)
Calibration ensures accurate weight detection by the washing machine. Make sure the drum is
empty before running Calibration.
1. Tap Settings > Calibration > Start.
• The door will be locked during the operation.
• The drum keeps rotating clockwise and anticlockwise for several minutes.
2. When complete, the washing machine turns off automatically.
Untitled-8 19
Auto Detergent
Amount
Less Std.
Water Hardeness
Soft Medium
The Auto Update function automatically updates the software for
performance improvement purposes ot to x bugs through
communicating with the update server. If you agree to this setting, it is
regarded as an agreement to running the auto update operation. When
the software is updated, some software features may become
English - 19
Step 3 of 4. Set Auto Dispense
Auto Softener
On On
Amount
More Less Std. More
Concentration
Hard Normal 2X High
Previous Next
Step 4 of 4. Set Auto Update
On
Previous Done
2014-03-19 4:00:43