Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The
SET
messages don't have an automatic acknowledgement with a
sent from the EclerNet device after it has processed the
update the values itself and must send the needed
confirmation from the device.
NOTES:
• The numerical values are always integer numbers without +, –, comma or dot symbols.
•
[PINGPONG]
is an optional parameter used to configure the device-client
communication with a periodical check, to see whether the client or the device have
terminated it. When configured this way, the device sends a
second, and the client must answer with a
get these messages along a 10 seconds period, the communication will be considered
terminated
•
<Input Channel>
&
output channel of the EclerNet device:
o It can be within a [1..8] range for MIMO88SG units.
o It can be within a [1..12] range for MIMO1212SG units.
•
<Preset Number>
the EclerNet device's memory.
• <Level>,
<Pre Vumeter Level>
[0..100] range that define values in a scale equivalent to [-inf..0] dB.
•
<GPI>
&
<GPO>
configured as 8x8 matrix masters (single units), and [1..16] for MIMO88 couples
configured as 16x16 matrix masters. For the NXA series GPI values can be within the
[1..4] or [1..6] range, depending on model. For the MIMO7272DN and MIMO4040CDN
GPI and GPO values can be within [1..8].
•
<GPI Value>
is a numerical value within the [0..100] range that indicates the value of
an analogue GPI input. For a digital input only 0 or 100 are the possible values.
•
<GPO Value>
is a numerical value within the [0..1] range: it can only be 0 or 1 (opened
or closed GPO).
•
<Rate>
is a numerical value within the [1..10] range that sets the VU-meter refresh
rate, or the number of times the vumeters' values are sent per second (by default = 3).
•
"<Device Name>"
names with blank spaces.
<Error ID>
is a numerical value for an error code.
•
•
"<Error Description>"
error description.
•
<Virtual Control>
is a numerical value that identifies a Virtual Control.
It can be within a [1..64] range for MIMO88SG, MIMO88SGCONF, , MIMO1212SG and
MIMO1212SGCONF models.
<Output Channel>
are numerical values that identify an input or
is a numerical value that identifies one available Preset stored in
y
<Post Vumeter Level>
are numerical values within the [1..8] range for the MIMO88
is the device name inside double quotation marks, to allow for
is a text chain inside double quotation marks, containing an
25
SET
command. The client must
GET
message if it requires
SYSTEM PING
SYSTEM PONG
message. If anyone doesn't
are numerical values in the
DATA
message
once per
Werbung
