Sundirect Tower500-Pro Installations- Und Bedienungsanleitung Seite 8

4.3 Manual Control via touch screen buttons
Activate the power switch, press and hold the "+" button for 3 seconds to turn on/off the heater via
touchscreen. Adjust your desired room temperature by pressing the "-" or "+" button.
If you would like to set up the timer, press the timer button and "00H" will appear on the screen and
you can set the timer by pressing "-" and "+" button to start the count-down timer.
Please notice that once the timer is set, the heater will automatically work under manual
mode.
4.4 Child lock
Press the "+" and "-" button together for 3 seconds to activate the child lock mode, the screen will
show "CL". Press the "+" and "-" again to quit the child lock mode.
4.5 Open window detection
This heater has an open window detection function. By default, the function is off but you can
activate this function after connecting your heater to the APP. When the function is
on, the heater will monitor the heating system. in case there is a dramatic temperature decrease
in a short time period, "OPE" will flash on the screen. The system will shut off the heater
and after 30 minutes normal operation will start again. By pressing any button in between the heater
will go back to normal operation.
4.6 Temperature calibration
Power on the heater, press and hold the + button until the screen shows the temperature reading.
Press and hold the Timer button for 5 seconds to enter the temperature calibration and edit the
number by pressing the "+" or "-" button. (You can adjust between +5/-5 degrees).
4.7 Factory mode
If you have any issues during the operation (including wifi connection), please try the factory mode
to reset your heater. Power on the heater and the temperature reading will display on the screen,
press and hold the "-" button for 5 seconds to reset the heater.
After the factory reset, the heater will clear all the previous temperature settings and operate under
manual mode.
4. 8 More functions of the APP
After connecting to the APP, you will be able to do more settings, including:
• Set up a heating mode and schedule
• Remotely operate your heater
• Constantly check the energy consumption of your heating system (Settings>>Energy Saving
Statistics)
• Disable the "Beep" noise
......
4.9 Control via APP
4.9.1 How to download the Sundirect Smart APP
8