TECHNICAL DATA
-
3 settings: 800W-1200W-2000W
-
For rooms up to 25m²
-
IPX0 (do not use in zone 0-1-2 - see drawing)
GENERAL INSTRUCTIONS
1. Remove the packaging and check that the device is intact. If in doubt, do not use
it and contact our Technical Assistance Centre. Packaging materials (plastic bags,
Styrofoam, staples, etc.) should be kept out of the reach of children as they can be
dangerous
Caution:
- The appliance should only be used by responsible adults;
- For their own safety, children and persons with reduced mental capacity should only
use the appliance under the supervision of responsible adults;
2. Before connecting the appliance, check that the rated value of the appliance
corresponds to the rated value of the mains.
3. If the power cord is damaged, it must be replaced by the manufacturer or else by a
qualified person to avoid any risk.
4. This appliance must only be used for the purpose for which it was made, i.e.
for additional electric heating in rooms. Any other use is considered improper and
therefore dangerous. The manufacturer is not responsible for damage caused by
improper, incorrect or unreasonable use.
5. Before cleaning or servicing the appliance, disconnect it from the mains by
unplugging the power cord or turning off the system switch.
6. If the appliance is faulty and/or not working properly, switch it off without
doing anything to it. If the above is ignored, the safety of the appliance may be
compromised.
120cm6
ZONE 3
ZONE 1
ZONE 2
radius 60cm
0cm
ZONE 1
ZONE 0
ZONE 2