Test The Ssscat Unit; Choose A Location; Care And Cleaning - Petsafe SSSCAT PPD17-16169 Gebrauchsanleitung

8
Test the SSSCAT
• Turn the SSSCAT
switch to the left ("I" position), and wait
about 2 minutes for it to normalize.
• You can test it by waving your hand from
side to side in front of it.

Choose a Location

• Place the SSSCAT
you would like your pet to avoid, such as a
rubbish bin or a doorway.
• Choose a location where the temperature is
between 15°C and 25°C.
• To prevent false activations, do not
place the unit in direct sunlight or in close
proximity to HVAC vents.
• To prevent false activations, do not point
the sensor toward a wall or an object that
is in direct sunlight or in close proximity to
HVAC vents.
• Position the unit for the pet to pass the sensor
instead of walking directly towards it.
• The spray range is about 1 metre from the unit.

Care and Cleaning

• Turn the unit off by sliding the switch to the
right ("O" position) before cleaning it.
• Use a cloth with warm, soapy water to
clean the nozzle monthly.
• Do not submerge the unit under water.
petsafe.com
Unit
™
unit on by sliding the
™
unit near an area that
™