Tc Mode - Agusta Brutale Corsa Bedienungsanleitung

4.4.5. "TC" Mode
Press "SET" in order to access to "TC" mode, then
press "SET" for over four seconds until "TC LEVEL"
appears. The current traction control level is the same
as the one shown on the display.
WARNING
The display modes may be changed or set
when the engine is off, the gear in neutral, the
4
motorbike stationary with your feet on the
ground. Do not change the display while dri-
ving.
Press "OK" for less than four seconds: the traction
control level rises up to the next value. Such value may
range between 0 and 8.
Press "OK" for over four seconds to confirm the
selected traction control level.
OPERATION
- 56 -
4