Selecting The Display Functions - Agusta Brutale Corsa Bedienungsanleitung

4.4.1. Selecting the display functions

The following settings may be changed
on the display:
• "RUN" (Odometer)
• "CHRONO" (Chronometer)
• "SERVICE" (Expiration of scheduled
maintenance service)
• "TC" (Traction control)
4
• "IMMOBILIZER" (Antitheft device)
• "ABS" (Antilock braking system)
To display the operating modes, press
"SET" for less than four seconds. When
pressed, the display shows all modes,
in a sequence. Select the desired
mode.
OPERATION
WARNING
The operation must be performed while the engine is
not running, the gears are in neutral, the motorcycle
is stationary, and with the feet on the ground. Do not
set the display functions while riding.
- 38 -
4