First Commissioning - Dorr HA-150 Bedienungsanleitung

06 |

FIRST COMMISSIONING

06.1 INSERTING THE BATTERIES INTO THE RECEIVER
Slide down the battery compartment cover (10) to open it. Insert 3 pcs AAA LR03 batteries (optional) according to the polarity
markings +/- in the battery compartment. Close the battery compartment lid.
06.2 INSERTING THE BATTERIES INTO THE MOTION DETECTORS (SENDERS)
Unscrew the screw (17) of the battery compartment cover and remove the battery compartment cover (18). Insert 3 pcs AAA
LR03 batteries (optional) according to the polarity markings +/- in the battery compartment. Close the battery compartment and
screw on the screw again.
07 | OPERATION
07.1 TURNING ON/OFF
Receiver:
To turn on the receiver, switch the On/O switch (8) to position ON. The LED power indicator (6) fl ashes red. To turn the receiver
o , switch the On/O switch (8) to position OFF.
Motion detectors (senders):
To turn the motion detectors on, press the On/O button (15). The On/O button fl ashes green for about 2 seconds. Then the
green LED will shut down to save battery power - but the motion detector is still on and ready for operation. To turn the motion
detectors o , press the On/O button (15) for about 3 seconds.
07.2 CONNECTING THE RECEIVER WITH THE MOTION DETECTORS
1. Set the On/O switch of the receiver (8) to the ON position. The LED power indicator (6) fl ashes red and indicates readiness
for signal reception.
2. Press the On/O button (15) of the motion detectors.
3. The motion detectors now connect automatically with the receiver. While connecting the corresponding LED signal indicator
(2) fl ashes green with sound and vibration. After successful connection the LED signal indicators (2) will light green con-
stantly.
LED indication kit with 2 motion detectors (Item No. 204800)
LED No. 1 lights green constantly
LED No. 2 lights green constantly
LED indication with DÖRR motion detectors supplementary kit (Item No. 204801)
LED No. 3 lights green constantly
LED No. 4 lights green constantly
LED No. 5 lights green constantly
• The maximum distance for connection is up to 150m in an open environment.
• If distance between receiver and the motions detectors is quite far, please pull out the receiver antenna (1)
to enhance the signal.
Motion detector 1 is active
Motion detector 2 is active
Motion detector 3 is active
Motion detector 4 is active
Motion detector 5 is active
13