Unpacking And Setting Up - IDEAL AP60 Pro Betriebsanleitung

Unpacking and setting up

Installation guidelines for optimum performance:
• The air intake ducts on the top can be used as handles
(see adjacent diagram).
• Place the device at least 10 cm away from the wall.
• Keep the device away from areas subjected to draft (wind).
• Make sure that furniture, fabrics or other objects do not come in contact with the air intake/
outlet or block them.
• Place the device on a stable, even surface and make sure there is sufficient air circulation.
1.
2.
4.
4.
7.
6.
28
3.
5.
8.
Take out the power cable (1.), operating
instructions (2.) and remote control (3. with
self-adhesive magnetic film).
Remove top packaging tray. Grasp the
Air Purifier by the air intake ducts and
lift it out of the box.
Please remove and dispose the self-adhesive
tape (4. Transport safety).
The front panel is hooked from below at two
ends and is kept closed by totally 4 magnets.
Open the front panel at the top, grip it firmly (5.)
and then swing it downwards (6.).
Remove the single piece of
cardboard (7. Transport safety).
Remove the front panel (8.).