Alternative Transmission Of Wlan Access Data - eQ-3 homematic IP HmIP-WLAN-HAP Installations- Und Bedienungsanleitung

Start-up
• For the data transmission, the LED
(A) of the Homematic IP WLAN
Access Point has to light up perma-
nently white. If the LED (A) of the
Homematic IP WLAN Access Point
lights up magenta or flashes yel-
low, press the system button (A).
Figure 7
• Make sure that your smartphone is
connected to the same WLAN net-
work as the Homematic IP WLAN
Access Point.
• Enter the password of your WLAN
network in the app and start the
transmission.
• During transmission, the LED starts
flashing white. This indicates that
the Homematic IP WLAN Access
Point was able to identify the
smartphone. Follow the instruc-
tions in the app.
• Transmission of the WLAN access
data has been successful, if the LED
changes from white flashing to yel-
low flashing.
• After successful transmission, the
Homematic IP WLAN Access Point
automatically connects to the
WLAN network and the server.
If the LED lights up permanently blue,
the server connection has successfully
been established. Continue with chap-
ter (see „5.3 Finishing set-up" on page
21).
If the transmission of the WLAN
access data has failed (LED re-
mains permanently white), you
can restart the transmission or use
the alternative procedure (see
„5.2.1 Transmission of WLAN ac-
cess data" on page
5.2.2 Alternative transmission of
WLAN access data
Alternatively, the Homematic IP WLAN
Access Point can open its own WLAN
network to transmit the access data
of your WLAN network. In this case,
the smartphone must change into the
WLAN network of the Homematic IP
WLAN Access Point.
• For the transmission of data, the
LED (A) of the Homematic IP WLAN
Access Point has to light up perma-
nently magenta. If the LED of the
Homematic IP WLAN Access Point
lights white, press the system but-
ton (A) to confirm. If the LED of the
Homematic IP WLAN Access Point
lights yellow, press the system but-
ton twice.
• Connect your smartphone to the
following WLAN network which
has been opened by the WLAN Ac-
cess Point:
Name (SSID): HmIP-WLAN-HAP-
xxxx (xxxx = last four digits of the
device number/SGTIN, no pass-
(see
19)).
20