MikroTik QRT 5 ac Kurzanleitung Seite 2

MikroTik devices are for professional use. If you do not have qualifications please seek a
consultant https://mikrotik.com/consultants
Depending on the antenna used, you must set its gain and set the installation setting to 'Outdoor'. This
is to ensure that EIRP meets the limit set by the local authorities. This is done in the WebFig Quickset
menu.
First steps:
 Make sure your ISP is accepting hardware changes and will automatically assign an IP address;
 For OmniTIK models, Connect your LAN cable to the device Ethernet2 port. Connect the device to the
power source with the provided adapter;
 Connect ISP cable to the Ethernet1 port;
 Set LAN computer IP configuration to automatic (DHCP);
 The Default IP address of the unit is 192.168.88.1, open this address in your web browser to start the
configuration. The username is admin and there is no password;
 Choose your country, apply country regulation settings and set up your password on the screen that
loads;
 Update RouterOS software to the latest version, make sure that the device has an internet connection;
 For other models, or if you have trouble accessing the IP address, download the Winbox from our
webpage and use it to connect through the MAC address;
 Update the device by downloading the latest software from our webpage and uploading it to the
Winbox, Files menu, and rebooting the device;
 Choose your country, apply country regulation settings, and set up your password.
Safety Information:
 Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
 Use only the power supply and accessories approved by the manufacturer, and which can be found in
the original packaging of this product.
 This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
 This product is intended to be mounted outdoors on a pole. Please read the mounting instructions
carefully before beginning installation. Failure to use the correct hardware and configuration or to