SCANCOOL OTC 95 BE Bedienungsanleitung Seite 12

always pull on the plug itself and never
the cable.
•
Remove the cabinet from use if it is not
working properly or exhibits any damage.
Disconnect the power plug. Transfer the
merchandise to other cabinets or a cold-
room and call your local Service Organi-
zation.
4. General view
OTC 95 BE/OTF 87 BE
1. Handle
2. Load limit line
3. Air baffle honey comb
4. Evaporator (under base plate)
5. Compressor
6. Thermostat or electronic controller (Dix-
ell)
7. Condenser
8. Lid.
a. Cooling air intake
b. Air outlet
STP1309
1. Handle
2. Load limit line
3. Air baffle honey comb
4. Evaporator (under base plate)
5. Compressor
6. Thermostat or electronic controller (Dixell)
7. Condenser
A . Cooling air intake
B. Air outlet
5. Installation
5.1 Single-row line-up
•
When cabinets are installed side by side,
no distance is required between the end
walls of the refrigerated cabinets under
normal ambient conditions.