EchoNous Kosmos Power Pack Kurzanleitung Seite 5

Charging your Power Pack
Step 1: Disconnect the probe if
connected.
Step 2: Connect the charger to the
Power Pack. Once connected, the
lights on the Power Pack will indicate
C
the battery power level.
C: AC Charger adapter point
C
Step 3: Disconnect charger once Power
Pack is fully charged.
(See Power Pack LED Status).
How to dismantle the Power Pack
(optional)
Step 1: To remove the Power Pack from the
mounting plate, press down on the release
tab (D) and slide the Power Pack down.
Step 2: To mount the Power Pack back on,
D
slide the Power Pack up into place.
5 Americ n English