Walimex Pro 380 Bi Color Gebrauchsanleitung Seite 20

Cleaning
WARNING
Danger of electric shock
■ Do not bring the device into contact with moisture or water.
■ Always pull out the power supply plug before starting to clean the device.
Device Cleaning
Housing Use a microfi ber cloth to remove light and stubborn dirt.
Illuminant Clean off dirt with a dust brush or a dry, soft cloth.
NOTE
Do not clean the illuminant with water. Even slightest residues on the
illuminant can cause bursting of the illuminant.
12. Accessories and options
You fi nd the best accessories for your device in our web shop: www.foto-walser.de.
13. Waste disposal and protection of the environment
Dispose of the device at a legally specifi ed collection point, such as with the
manufacturer, electronics brands or at a local disposal depot. This service is free
of charge.
14. Reference to the Declaration of Conformity
"Walser GmbH & Co. KG hereby declares that the LED is compliant with
the general requirements and all other applicable regulations of the directive
2014/30/EU". The Declaration of Conformity is available from the following
address: info@walser.de.
38
15. Technical specifi cations
LED Ringlight 380 Bi Color
Model RLL-380BV
Article No.
Max. Power 23 Watts
Model Bi Color
LED Version
Total no. of LED´s
No. LED´s Daylight
No. LED´s Tungsten
Color temperature
Beam Angle
1250 Lux/0,5 m, 365
Luminance max.
Lux/1m, 99 Lux/2m
Color Rendering Index CRI 93-95 Ra
Dimensions (LxWxD) 380 x 255 x 50 mm
Weight ringlight
Weight holders + screws
Weight power adapter
+ cable
Total weight incl. bag 1,713 g
Max load ball head
500 Bi Color
RLL-500BV
21499 21500
32 Watts
Bi Color
LED High-power SMD LED
384 160
192 80
192 80
3000 - 5600 ± 300 Kelvin
60° 100°
1320 Lux/0,5 m, 429 Lux/1m,
121 Lux/2m
93-95 Ra
495 x 365 x 50 mm
810 g 945 g
123 g 502 g
300 g 368 g
3,308 g
1 kg 1 kg
39