Whispbar K987W Montageanleitung Seite 7

EN
Fitting Kit
K987W
Select plastic internal block (from fitting kit)
and insert into foot.
Repeat for all legs.
Fit rubber pads (supplied with fitting kit) to
foot. Pad may vary in shape to that shown.
Make sure the pad fits into the holes
underneath the foot.
RECOMMENDED POSITION DUE TO
AIRBAGS IN ROOF:
Front: above centre door pillar (as shown).
Rear: 700mm (27 1/2") rearwards from
centre door pillar.
Apply masking tape to vehicle roof in all
four positions.
Mark reference point on masking tape with
a pen.
7