Whispbar K987W Montageanleitung Seite 4

Fitting Kit
Items you will require:
Attention:
First Time Installation
Tape measure
Pen
Flat-head screwdriver
Craft knife
Side cutters or tin snips
Hammer
8mm (3/8") punch
Cordless drill
Depth stop
Vacuum cleaner
Rust inhibitor
Small paint brush
Neutral cure silicon sealant
Rivet gun
Attaches with riveted mounts under rubber
ditch mould. Professional installation
advised.
Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
4
EN
K987W