Cleaning And Maintenance Of The Control Unit And The Supply Hose; Cleaning; Maintenance - Micro-Mega ENDOAce Torque Gebrauchsanweisung

2 Cleaning and Maintenance of the Control Unit and the Supply Hose

2 Cleaning and Maintenance of the Control Unit and the Supply Hose

Cleaning

Disinfect the control unit and the supply hose by wiping after each treatment.
Use only disinfectants approved within the market of use.
Disinfect with a clean, damp cloth using isopropyl alcohol.
Do not exert any pressure on the LCD screen.
Do not use products containing acetone, chlorine or bleach as disinfecting agents.
Never immerse in solvent.
Not suitable for cleaning in an ultrasonic bath.

Maintenance

ATTENTION!
Repair and maintenance work on the electrical part of the MICRO-MEGA
specialists or by persons trained in the factory and familiarized with the safety regulations.
DO NOT OPEN CONTROL UNIT. There are no serviceable parts inside the control unit.
Page 31
® ®
ENDOAce Torque must be performed only by
ENDOAce
®
Torque